Sierra-video Ethernet TCP/IP Web Control Bedienungsanleitung

SIERRA VIDEO SYSTEMS Ethernet TCP/IP Web Control Softwar

SIERRA VIDEO SYSTEMS Install IIS Microsoft Internet Information Services (IIS) is installed on a Windows XP system by using Control Panel, Add/Remo

TCP/IP WEB CONTROL SOFTWARE 5 Services, (local computer). Expand Web Sites, then highlight Default Web Site to select it. Click on the Propertie

SIERRA VIDEO SYSTEMS On the Documents tab, note the names of the files in the list. When a user browses to the IP address of the web site and does

TCP/IP WEB CONTROL SOFTWARE 7 Configure IIS Security In the IIS main dialog box (Start, Programs, Administrative Tools, Internet Information Serv

SIERRA VIDEO SYSTEMS 3. On the Documents tab, check Enable Default Document and make sure index.html is listed as a default document. 4. On the

TCP/IP WEB CONTROL SOFTWARE 9 5. Set up the access and authentication to ensure that only authorized users can access the web pages. These we

SIERRA VIDEO SYSTEMS 6. Click OK twice to save all settings. Configure Grip Server for Web Pages Grip Server provides two different interfaces fo

TCP/IP WEB CONTROL SOFTWARE 11 4. Open My Computer within the Computers folder. 5. Open the DCOM Config folder within My Computer. 6. Scroll

SIERRA VIDEO SYSTEMS 8. On the Security tab, in the Access Permissions group, click Customize, then click Edit. 9. Click Add. 10. Click Advance

TCP/IP WEB CONTROL SOFTWARE 13 13. Click Find Now, and then select the user that you will assign to any accessor of the router control web page

SIERRA VIDEO SYSTEMS Start a web browser on another computer, and enter the address of the router control web pages, which will be of the form (ser

SIERRA VIDEO SYSTEMS Chapter 3 Operation Introduction All panels have a commonality of operation. The difference in panel operation is described la

SIERRA VIDEO SYSTEMS Standard Control Panel Click on Standard Control Panel. The message “Getting Router Model” will display next to Router Status.

TCP/IP WEB CONTROL SOFTWARE Switching To make a switch, first select a destination from the Destination drop down list. The current status of the sel

SIERRA VIDEO SYSTEMS Status When a destination is selected, the current status (source currently connected to that destination) is displayed in the

TCP/IP WEB CONTROL SOFTWARE Click the Connect button to connect to GRIP Server and the router. If successful, the "Router Status" field w

SIERRA VIDEO SYSTEMS If the destination is locked, the button to the right of the Take button will be labeled Unlock (and lit up), and if not locke

TCP/IP WEB CONTROL SOFTWARE Breakaway Control Panel Same as the standard control panel plus level breakaway, and status of each level. Selected Des

SIERRA VIDEO SYSTEMS Programmable Control Panel Same as the break-away panel plus 8x8 programmable XY buttons for single button takes. To progr

TCP/IP WEB CONTROL SOFTWARE SVS Basic Router Control Panel This panel Allows for Break-away switching as well as all functions available on other pan

ETHERNET TCP/IP WEB CONTROL SOFTWARE User’s Manual © Sierra Video Systems P.O. Box 2462 Grass Valley,

Table of Contents Introduction 1 Overview 1 Only Internet Explorer is Supported 2 Installation 3 Introduction 3 Install Grip Server 3 Install IIS

SIERRA VIDEO SYSTEMS Chapter 1 Introduction Overview Ethernet TCP/IP Web Control Software consists of two programs, GRIP Server, and TCP/IP software

SIERRA VIDEO SYSTEMS Minimum System RequirementsFor the computer running GRIP Server: PC P III 128 M Ram 1024x768 monitor and video card Operating

SIERRA VIDEO SYSTEMS 3 Chapter 2 Installation Introduction Installation procedures must be followed carefully for correct operation of the TCP/IP W